Kamstrup USB Meter Reader Guia De Inicio Rapido página 2

GB - Installation of Software
1. Start the Internet browser and connect to the website
www.kamstrup.com.
2. Under "Downloads", select "USB Meter Reader".
3. Fill in the form and click on "Send".
4. Click on "Confirm" to continue or "Back" to correct your data.
5. You will receive an e-mail with a link for software download.
6. Click on the link and select "Download".
7. Select "Run" twice. The program is now saved to your PC.
8. Select "Next ".
9. When asked, accept the installation of Microsoft ".Net
Framework".
Select "Yes" for allowing .Net to make changes on the
computer.
10. Select language, and click "Next".
11. Select "Next" twice. Now the program is installed.
12. Select "Yes" to allow the installation of the program.
13. Select "Close" to finish the installation.
14. Select "Next" to confirm the installation of USB Reader driver.
15. Select "Execute" to end the installation.
16. Start the program by clicking on the icon on the desktop.
17. Insert the USB in your PC.
18. Select "Install the software automatically", and then click
"Next".
19. Enter a name for the USB Reader. If you have several USB
Readers, name them all.
20. Create meters, groups and job lists as described in the online
user manual.
The online manual is available under the Help menu in the pro-
gram (F1) and on www.kamstrup.com.