Bose B1 Guia De Instalacion página 2

Svenska Nederlands
B1 B M
ASS ODULE
Introduction
Figure 1
Carton contents
Positioning the B1 bass module
Figure 2
B1 placement options
2
Italiano Français
Thank you for purchasing the Bose
II system. The bass module output of the power stand can adequately drive one or two B1
bass modules. Up to two more B1 bass modules can be added to your system by using a
Model A1 PackLite TM power amplifier connected to the bass line output of the power stand.
Carefully unpack the carton and check for the items shown in Figure 1. Save all packing
materials, which provide the safest way to transport your system. If an item appears to be
damaged, do not attempt to use it. Notify Bose or your authorized Bose dealer immediately.
4-wire cable (blue)
B1 bass module
For more information on using the B1 module, please refer to the owner's guide that came
with your system, or visit www.Bose.com/musicians.
The B1 bass module can be placed vertically or horizontally on the floor next to the power
stand. When placed horizontally, you can build a stack of up to four modules (Figure 1).
Normal vertical or
horizontal placement
CAUTION: Do not connect more than two B1 bass modules to the Bass Module Out con-
nector on the power stand. Driving more than two B1 bass modules from this output will improp-
erly load the power stand amplifier, resulting in less than full system performance.
Español Deutsch
® B1 bass module to add to your L1 model I or L1
B1 bass module
5 ft (1.5 m)
Stacking
Dansk English
TM model
Carrying case