Before Use - Mellerware MA Beker III 600W Manual De Instrucciones

2. 3. 3. Do not use the appliance when empty.
2. 3. 4. Use the appliance handle/s, to carry it or move it.
2. 3. 5. Do not turn the appliance over while it is in use
or connected to the mains.
2. 3. 6. Do not cover the cooking surface or food with
aluminium foil and other similar materials.
2. 3. 7. To keep the non-stick treatment in good condi-
tion, do not use metal or sharp utensils on it.
2. 3. 8. Boiling liquids could overflow from the recep-
tacle if it is over filled.
2. 3. 9. Unplug the appliance from the mains when not
in use and before undertaking any cleaning task.
2. 3. 11.This appliance should be stored out of reach
of children.
2. 3. 13.Do not store the appliance if it is still hot.
2. 3. 14.Never leave the appliance unattended when in
use and keep out of the reach of children, as
this is an electrical appliance that reaches high
temperatures and may cause serious burns.
2. 3. 15.Take care when handling recipients containing
liquids heated in this appliance as they may boil
fiercely.
2. 3. 16.If, for some reason, the oil were to catch fire,
disconnect the appliance from the mains and
smother the fire using the lid, a cover or a large
kitchen cloth. NEVER WITH WATER.
2. 3. 17.Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the pan
is switched off permanently.
2.4. Service:
2.4.1.Make sure that the appliance is serviced only by suitably
qualified technician, and that only original spare parts or
accessories are used to replace existing parts/ acces-
sories.
2.4.2.If the supply cord is damaged, the manufacturer or
its service agent or a similarly qualified person must
replace it in order to avoid a hazard.
2.4.3.Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer's liability
null and void.
26500B_IM.indd 3
All manuals and user guides at all-guides.com
3. Instructions for use

3.1. Before use:

3.1.1. Remove the appliance's protective film(if applicable).
3.1.2. Before using the product for the first time, clean the
parts that will come into contact with food in the man-
ner described in the cleaning section.
3.1.3. Set the bread maker in baking mode and bake empty
for about 10 minutes. After cooling it down clean once
more.
3.1.4. After cooling it down clean once more.
3.1.5. Dry all parts thoroughly and assembly them, so the
appliance is ready for using.
NOTE: As soon as the bread maker is plugged into the power
supply, a beep will be heard and "3:00" appears in the
display after a short time. But the two dots between the
"3" and "00" don't flash constantly. The arrow points to
900g and MEDIUM. This is the default setting.
3.2 Control Panel and fucntions
1. Basic 4. Quick
2. French 5. Sweet
3. Whole wheat 6. Gluten free
Light Med Dark 700g 900g
Menu
Colour
This indicates the Power light
chosen program
START/STOP
This button is used for starting and stopping the selected
baking program.
To start a program, press the START/STOP button once. A
short beep will be heard and the two dots in the LCD begin
to flash, the working light illuminates and the program starts.
Any other button is inactivated except the START/STOP button
after a program has begun. This feature will help to prevent
any unintentional disruption to the operation of program.
To stop the program, press the START/STOP button for
approx. 2 seconds, then a beep will be heard, the working
light will be extinguished, it means that the program has been
switched off.
PAUSE function
After procedure starts up, you can press the START/STOP
button once to interrupt at any time, the operation will be
paused but the setting will be memorized, the working time
will be flashing on the LCD. Touch START/STOP button again
or within 10 min without touching any button, the program will
7. Ultra fast 10. Cake
8. Dough 11. Sandwhich
9. Jam 12. Bake
Start
Stop
Loaf
FUNCTION
The operation time Working light
for each program
2018-09-27 02:14:52 PM