Xerox Phaser 3150 Guia Del Usuario página 15

5
Click Add.
6
If Auto Select does not work properly, select Xerox in
Printer Model and Xerox Phaser 3150 in Model Name.
Your printer appears in the Printer List and is set as a
default printer.
For USB-connected Macintosh
In Mac OS 8.6 - 9.2
N
OTE : The location of the Desktop Printer Utility may be different
depending on your Macintosh OS.
1
Follow the instructions on page 11 to install the PPD file on
your computer.
2
On the Macintosh double-click Application.
3
Double-click Utilities.
4
Double-click Desktop Printer Utility.
5
Select LaserWriter 8, and select Printer (USB) in the list
box. Then click OK.
6
Click Change in the USB Printer Selection section. The
name of your printer appears in the list.
7
Click Phaser 3150, and click OK.
8
Click Auto Setup in the PostScript Printer Description
(PPD) File section.
If Auto Setup does not work properly, click Select PPD and
choose Xerox Phaser 3150.
9
When the setup is completed, click Create.
10
Click Save.
11
Fill in the Printer Name field and click OK.
Using a PostScript Driver
13