Xerox Phaser 3150 Guia Del Usuario página 9

9
Xerox Phaser 3150 PS appears in the Printer list,
When
click Next .
10
Enter a name for the printer and click Next.
11
Choose whether you want to share your printer on a
network or not and click Next.
12
If you want to share your printer on the network, describe
the location and capabilities of the printer and click Next.
13
When a window prompting you to print a test page appears,
select Yes or No and click Next.
14
When the installation is complete, click Finish.
15
If you select Yes in Step 13, the printer prints a test page.
When the page prints out properly, click OK.
If it doesn't print properly, click Troubleshoot to solve
your printer's problem.
Printing a Document
The following procedure describes the general steps required for
printing using the PostScript driver. The exact steps for printing
a document may vary depending on the application programme
you are using. Refer to the User's Guide of your software
application for the exact printing procedure.
1
Open the document you want to print.
2
Select Print from the File menu. The Print window is
displayed (It may look slightly different depending on your
application).
Using a PostScript Driver
7