Maintenance; Replacement Parts - Powermatic PM-TJ Instrucciones De Funcionamiento Y Manual De Piezas

11.0 Maintenance

Always disconnect power to
table saw, allow blade to completely stop, and
lower blade below
performing maintenance on saw or jig. Failure to
do this may result in serious personal injury.
Blow or vacuum saw dust from jig after use.
Do not use volatile or harsh cleaning agents, as they
can damage plastic parts.

12.0 Replacement Parts

Replacement parts are listed on the following pages. To order parts or reach our service department, call 1-800-
274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m., CST. Having the Model Number and Serial Number of
your machine available when you call will allow us to serve you quickly and accurately.
table surface, before
Use a brush, if needed, to clean threads of clamp
screw and micro-adjust screw.
Periodically apply a light machine oil on clamp bar
and toggle plates. Keep toggle plates free of debris
and sawdust.
Keep table saw miter groove, and jig guide bar,
clean for free movement of jig.
1 2