Noise/Vibration Information - Bosch GSR 18V-60 FC Professional Manual Original

Cordless drill/driver
Signal interval
D)
Signal range
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
C) The mobile terminal devices must be compatible with Bluetooth® Low Energy devices (version 4.1) and support the Generic Access Profile
(GAP).
D) The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be signi-
ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).

Noise/Vibration Information

Noise emission values determined according to EN 62841-2-1 for GFA 18-M, GFA 18-B, GFA 18-WB.
Noise emission values determined according to EN 62841-2-2 for GSR 18V-60 FC, GFA 18-W, GFA 18-E.
Typically, the A-weighted noise level of the power tool is
Sound pressure level dB(A)
Sound power level dB(A)
Uncertainty K dB
Wear hearing pro-
tection!
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 62841-2-1 for GFA 18-M GFA 18-
h
B, GFA 18-WB:
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 62841-2-2 for GSR 18V-60 FC
h
GFA 18-W, GFA 18-E:
Drilling into metal:
a m/s
h
K m/s
Screwdriving:
a m/s
h
K m/s
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
Bosch Power Tools
GSR 18V-60 FC GFA 18-M
8 s
Maximum 30 m
GSR 18V-60 FC GFA 18-M
75
86
5
2
– < 2,5
2
–
2
< 2,5
2
1,5
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u
Inserting the Bluetooth ® Low Energy Module
GCY 30-4 (Accessory)
Read the corresponding operating instructions for informa-
tion about the Bluetooth® Low Energy Module GCY 30-4.
GFA 18-B GFA 18-W
– – –
– – –
GFA 18-B GFA 18-W
75 75 74
86 86 85
5 5 5
< 2,5 –
1,5 1,5 –
– – < 2,5
– – 1,5
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
1 609 92A 53L | (09.12.2019)
English | 17
GFA 18-E GFA 18-WB
– –
– –
GFA 18-E GFA 18-WB
74 75
85 86
5 5
– < 2,5
– 1,5
< 2,5 –
1,5 –