Standard Accessories; Optional Accessories - AKG C2000B Modo De Empleo

Adding Phantom Power to Unbalanced Amplifier Inputs
Cleaning
To clean the metal surfaces, use methylated spirits or alcohol.

Standard Accessories

H 85 shock mount

Optional Accessories

For optional accessories, refer to the current AKG catalog or folder, or
visit www.akg.com. Your dealer will be glad to help. B 18 battery power supply
MK 9/10 10-m audio cable with 3-pin XLR connectors
N 62 E AC power supply for two microphones
N 66 E AC power supply for six microphones
PF 100 studio pop filter
SA 41/1 stand adapter
ST 102 A floor stand
ST 200 heavy floor stand
W 4000 external windscreen (supplied with the C 4000 B)
8
Specifications
Type:
Polar patterns:
Sensitivity at 1000 Hz:
Frequency range:
Electrical impedance:
Recommended load impedance:
Bass cut filter slope:
Preattenuation pad:
Equivalent noise level
to IEC 60268-4:
Equivalent noise level
to IEC 60268-4 (A-weighted):
Signal/noise ratio re 1 Pa
(A-weighted):
Max. SPL for 0.5% THD (0/-10 dB): 200 / 630 Pa
Dynamic range:
Environment:
Power requirement:
Current consumption:
Connector pinout:
Size:
Net weight:
*) Values for 48 V phantom power; reduce by 3 dB for 24 V and 6 dB for
12 V phantom power.
This product conforms to the standards listed in the related Declaration
of Conformity. To order a free copy of the Declaration of Conformity for
this product, visit http://www.akg.com or contact sales@akg.com.
condenser pressure gradient
microphone
cardioid
20 mV/Pa - 34 dBV
30 to 20,000 Hz (refer to frequency
response curve)
≤ 200 ohms
≥ 1000 ohms
6 dB/octave below 500 Hz
-10 dB, switchable
30 dB
20 dB-A
74 dB*)
140 / 150 dB SPL*)
120 dB (A-weighted)*)
- temperature: -10°C to +60°C
- (14°F to 140°F)
- relative humidity: 90% (+20°C/68°F),
85% (+60°C/140°F)
9 to 52 V phantom power
to IEC 61938
≤ 2 mA
3-pin male XLR to IEC standard
max. dia.: 53 mm (2.1 in.),
length: 159 mm (6.3 in.)
325 g (11.5 oz.)