Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
Please, read and follow these instructions of safety before using this appliance.
Our warranty doesn't cover damages and/or injuries caused by non­observance of these
safety norms and instructions. Keep this booklet of instructions in a safe place and adjoin
it to the appliance if or when you should give it away.

IMPORTANT SAFEGUARDS

Danger! Never use the appliance in the bath, or near a water-filled hand-basin. Risk of a fatal
electrical shock!
Do not let children use the equipment without supervision. Injury and electrical shock hazard!
Connect the adaptor exclusively to AC mains of 230 Volts ~ 50Hz. Device may ignite spontaneously!
For cleaning, never immerse the device in water. There's a risk of electrical shock due to
penetrated water!
Connect the appliance exclusively to the adapter supplied with it. Risk of fire!
Never bend or squeeze the cable, nor let it get in contact with hot things. Risk of electrical shock due
to damaged cable insulation!
After each use unplug the adapter from the mains. Risk of fire due to over-heating of the
transformer!
Before each use check the appliance, in case of damage of any kind avoid using it. Injury and
electrical shock hazard!
Attention! Do not open or damage the pedicure device as well as the pedicure device by forcefully
impacts. Injury and electrical shock hazard!
STARTING UP
I
Press the abrasive disk firmly onto the velcro.
Connect the appliance to the adapter (4) with the small plug (6), conforming the poles (+/-).
II
Plug in the adapter. The pilot lamp (7) indicates proper connexion to mains. Adjust the
speed of rotation on the adapter for the best performance of the appliance on the adapter
according to the result wanted (highest voltage on 9 or 12 Volt).
III
Switch the set on and holding it at the end, near the switch, press the head gently on the
areas to be rubbed down.

Publicidad

Tabla de contenido
loading

Tabla de contenido