Step 5: Customize The Photo; Step 6: To Select Another Photo, Repeat Steps 4 And 5; Step 7: Print Photo(S); Step 8: Remove The Memory Card - Lexmark 310 Serie Guía De Usuario

Step 5: Customize the photo

You can adjust the photo settings before you print. If you want to:
•
Crop the photo, see page 18.
•
Adjust the brightness, see page 19.
•
Change the number of prints, press
•
Change the print quality, see page 23.
•
Change the blank paper size, see page 22.
Step 6: To select another photo, repeat steps 4
and 5.
When you are finished selecting your photo(s), continue with step 7.

Step 7: Print photo(s)

Press .
Start
If Preview before Print is on, a preview of the print job is first displayed.
Press again to print the photo.
Start
If Preview before Print is off, the photo prints immediately.
Note: To adjust the Preview setting, see page 23.

Step 8: Remove the memory card

Warning:
Do not remove the memory card while the light is
blinking. The light blinks to indicate the memory card is
being read or is transmitting data.
14
Number Of Prints
.