JANE be cool Jupiter Manual Del Usuario página 54

EN
body make sure rebounce bar staty firmly of bacrest
of vechile seat.
Securing your Child in the ISOFIX CAR SEAT
Forward Facing
Note
1. When installing baby car seat in the forwards facing
mode, do not use the infant insert.
2. Please install the Base on the vehicle seat, then
install the seat, and then put the child in the baby
car seat.
3. After the child is placed into the baby car seat,
check whether the shoulder harnesses are at proper
height assembled before using it for infant.
28. 1. Press the webbing adjustment button, while pu-
lling out the shoulder harnesses to the proper length.
2. Press the red button to disengage the buckle.
54
3. Fix the buckles on the both sides of seat to make
placing the baby more convenient.
29. 4-Place the child into the baby car seat and
engage the buckle.
30. ! When used forward facing, the shoulder harness
height must be even with the child's shoulders.
! After the child is seated, re-check whether the
shoulder harnesses are at the proper height.
5. Engage the buckle.
6. Pull down the adjustment webbing and adjust it to
the proper length to make sure your child is snugly
secured. 29.
! Make sure the space between the child and the
shoulder harness is about the thickness of one hand
lay flat on children's chest.