DJI PHANTOM 4 PRO+ Guia De Inicio Rapido página 8

6. Flight
Ready to Go (GPS)
In the DJI GO 4 App:
Auto Takeoff
The aircraft will take off and hover at
an altitude of 4 feet (1.2 meters).
Return-to-Home (RTH)
Bring the aircraft back to the Home
Point. Tap again to stop the procedure.
TapFly
Tap on your screen to fly your Phantom
in that direction, avoiding obstacles as it
flies.
Watch the tutorial in the DJI GO 4 app or on the official DJI website to learn more.
●
Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to the Home Point, you should
●
guide it with the control sticks. Refer to the Disclaimer and Safety Guidelines for more details.
Manual Takeoff
OR
Combination Stick Command
to start/stop the motors
Rotating propellers can be dangerous. Do not start the motors when there are people
●
nearby.
Always keep your hands on the remote controller so long as the motor is still spinning.
●
Stop motor mid-flight: Pull the left stick to the bottom inside corner while
●
simultaneously pressing the RTH button. Only stop motors mid-flight in emergency
situations when doing so can reduce the risk of damage or injury. Refer to the user
manual for details.
It's important to understand basic flight guidelines, for the safety of both you and those around you. Don't forget to
read the Disclaimer and Safety Guidelines.
6
Before taking off, make sure the Aircraft Status Bar in the DJI GO 4 app
indicates 'Ready to Go (GPS)' or 'Ready to Go (Vision)' if flying indoors.
Left stick up (slowly)
to take off
Auto Landing
The aircraft will land vertically and stop its
motors.
Normal
You are in control of the Phantom, with
satellite and Return-to-Home support.
ActiveTrack
Mark an object on your screen to track it
as it moves.
Manual Landing
Left stick down (slowly)
until you touch the ground
Hold a few seconds to stop
the motors
Stop motor mid-flight