jbc RWT-A Manual Del Usuario página 4

Assembly
1. Fixing the Flange
Fix the flange on your work table with the
supplied screws, nuts and washers.
3. Inserting the Adapter (JT/TE)
Slide the adapter along the hose to the end of
the handle.
4
Screw
Washer
Nut
Adapter
2. Setting up the Tool Arm
Fit the tool arm onto the flange and tighten the
allen screw.
4. Mounting the Tool
Insert the tool as far as possible.
5. Place the hose in the clamp
Allen key