Festo MPA-MPM-PI Manual De Instrucciones página 13

1 User
The MPA valve terminal has been designed exclusively for
controlling pneumatic actuators. The maximum values
specified in the section Technical specifications" must be
observed here. Detailed information can be found in the
Pneumatics Manual P.BE−MPA−.. .
Warning
S Switch off the power supply before connecting or
disconnecting plugs (otherwise this could lead to
functional damage).
S Use only power units which guarantee reliable
electrical isolation of the operating voltage as per
IEC/DIN EN 60204−1 Observe also the general
requirements for PELV power circuits as per
IEC/DIN EN 60204−1.
Please note
Commission only a valve terminal which has been fitted
and wired completely.
Festo MPA−... 0412NH English
instructionsEnglish
13