Eaton Crouse-Hinds Serie Información De Instalación Y Mantenimiento
Fmva/pfma cable de seguridad de reflector led
Ocultar thumbs
Ver también para Crouse-Hinds Serie:
- Información seguridad (28 páginas) ,
- Información de instalación y mantenimiento (16 páginas) ,
- Nformación de instalación y mantenimiento (15 páginas)
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
FMVA/PFMA LED floodlight safety cable
(Part number: SC831)
Installation & maintenance information
SAFETY CABLE INSTALLATION INSTRUCTIONS –
20L/25L
1.
Remove power from floodlight.
2.
Select a mounting location directly above luminaire's center of gravity
(centerline of fixture).
3.
Install appropriate corrosion-resistant hardware into wall or surface to
interface with safety cable. Weight of floodlight is 45 lbs.
4.
Ensure that safety cable is taut, and there is no slack in the cable after
installation. Wrap safety cable around yoke.
5.
Install safety cable loop in carabiner.
6.
Attach carabiner to mounting hardware, and ensure that carabiner
gate is installed fully on threads.
•
Safety cable accessory part number: SC831
SAFETY CABLE ROUTING – 40L/50L
1.
Remove power from floodlight.
2.
Select a mounting location directly above luminaire center of gravity
(centerline of fixture).
3.
Use two (2) safety cables, one around each side bracket, when
installing for use with floodlight.
4.
Install appropriate corrosion-resistant hardware into wall or surface to
interface with safety cable. Weight of floodlight is 81 lbs.
5.
Wrap one (1) safety cable around each side bracket. Ensure that
safety cable is taut, and there is no slack in the cable after installation.
6.
Install safety cable loop in carabiner.
7.
Attach carabiner to mounting hardware, and ensure that carabiner
gate is installed fully on threads.
•
Safety cable accessory part number: SC831
All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable. The accuracy or completeness thereof are not guaranteed. In
accordance with Eaton's Crouse-Hinds Division's "Terms and Conditions of Sale," and since conditions of use are outside our control, the purchaser should determine the suitability of the product for his intended
use and assumes all risk and liability whatsoever in connection therewith.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Eaton's Crouse-Hinds Division
1201 Wolf Street, Syracuse, New York 13208 • U.S.A.
Copyright
2018
©
IF 1858
IF 1858
Revision 1
New 09/18
Publicidad
Manuales relacionados para Eaton Crouse-Hinds Serie
Resumen de contenidos para Eaton Crouse-Hinds Serie
- Página 1 All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable. The accuracy or completeness thereof are not guaranteed. In accordance with Eaton’s Crouse-Hinds Division’s “Terms and Conditions of Sale,” and since conditions of use are outside our control, the purchaser should determine the suitability of the product for his intended use and assumes all risk and liability whatsoever in connection therewith.
- Página 2 Toutes les déclarations et les informations techniques contenues dans le présent document sont basées sur des renseignements et des tests que nous croyons fiables. Leur exactitude ou leur exhaustivité ne sont pas garanties. Conformément aux conditions de vente de la Division Crouse-Hinds d’Eaton, et étant donné que les conditions d’utilisation sont hors de notre contrôle, l’acheteur doit déterminer si le produit convient à...
- Página 3 Todas las declaraciones, información técnica y recomendaciones contenidas en el presente se basan en información y pruebas que creemos que son confiables. No se garantiza su precisión o integridad. De acuerdo con los “Términos y Condiciones de Venta” de la división Crouse-Hinds de Eaton, y dado que las condiciones de uso se encuentran fuera de nuestro control, el comprador debe determinar la idoneidad del producto para su uso indicado y asume todos los riesgos y responsabilidades al respecto.
- Página 4 In Übereinstimmung mit den allgemeinen Geschäftsbedingungen von Eatons Crouse-Hinds Division für den Verkauf, und da die Einsatzbedingungen für unsere Produkte nicht unserer Kontrolle unterliegen, muss der Käufer die Eignung des Produktes für die vorgesehene Verwendung selbst einschätzen. Der Käufer übernimmt alle Risiken und die Haftung in Zusammenhang mit der Benutzung des Produkts. Eaton’s Crouse-Hinds Division IF 1858 1201 Wolf Street, Syracuse, New York 13208 •...