The Product; Pro Link Basic - THERMEx PRO LINK II Serie Instrucciones

M 536991501911122018

THE PRODUCT

Pro Link is the solution for balancing the air flow in your kitchen, even when you turn on your cooker hood. Pro Link is available in three different
packages for covering the majority of your needs:
•

Pro Link Basic

• Pro Link Premium
• Pro Link Plasma
The options available in the different packages and how they are installed will be described in the following sections.
PRO LINK BASIC
Pro Link Basic consists of a transceiver and receiver for wireless communication. This eliminates the need to run cables between the hood and
the ventilation system.
The Pro Link Basic receiver contains a potential-free contact with a normally open or normally closed function, thus allowing the volume of air
that is blown in from the ventilation system to increase when the hood is activated. This means that the volume of air in low energy houses,
apartments with independent ventilation systems or smaller central ventilation systems can be balanced even when the hood is in use.
NOTE: Always follow the instructions of the manufacturer of the ventilation system when connecting the Pro Link Basic.
RECEIVER
The receiver is mounted near by the ventilation system.
NOTE: Always follow the instructions of the manufacturer of the ventilation system when connecting the Pro Link Basic.
1 2 3
TRANSCEIVER
The transceiver is mounted on the cable between the circuit board and control panel inside the hood.
4 5 6 7 8
1
2
3
4
THERMEX PRO LINK II
1. Dip switch
2. LED
3. Button for connection
4. Fuse
5. 230 V in
6. Connection of the valve motor
7. Relay 2
8. Relay 1
1. Connector for mounting on the hood's
circuit board
2. Green LED - indicator for connection
3. Connector for control panel
4. Button for connection
67