THERMEx PRO LINK II Serie Instrucciones página 73

M 536991501911122018 THERMEX PRO LINK II 73
MOUNTING THE VALVE ON THE PIPING SYSTEM OF THE VENTILATION SYSTEM
For best results, the valve can be mounted on the piping system of the ventilation system so that the air drawn through the valve is mixed with
the heated supply air from the ventilation system. This reduces the downdraft and draft from the air vents for unbalanced operation.
NOTE: Always follow the instructions of the supplier of the ventilation system when connecting Pro Link.
INSTALLING THE VALVE FOR AIR SUPPLY FROM THE OUTSIDE
The damper can be installed using direct air supply from the outside, e.g. through a roof hood or a valve in the wall.
NOTE: There may be a downdraft and draft from the air vents if the air is drawn directly from the outside when unbalanced ventilation is in
operation.