Ubbink Robotclean 3 Manual Del Usuario página 4

1 Pool Robotclean 3 Operating Manual and Parts List
- The appliance may only be connected to an earthed AC 230 V safety socket (residual current protection device with a rated residual current of no more than 30 mA).
- The power supply for the transformer must be at least 3.5 metres away from the pool.
- The pool cleaner may only be used for cleaning private pools. Any other use leads to the immediate loss of the warranty claim.
- The pool cleaner is not suitable for pools with a film thickness below 0.4 mm. Use of the pool cleaner below this film thickness is at your own risk.
- The pool cleaner must not be used when there are people in the pool.
- The sealed drive unit and transformer contain no parts that require maintenance. These parts may only be opened by specialists, otherwise the warranty will become void.
- During the cleaning mode, some lubricant may leak from the engine oil seal, which may result in slight water contamination.
- The pool cleaner may only be operated with the supplied transformer.
- Operating the pool cleaner outside the water can cause serious damage and will lead to loss of the warranty.
- Do not leave the cleaner in the pool constantly and never expose the pool cleaner and transformer to high temperatures (heating, etc.) or weather conditions (rain, etc.).
- If the transformer or other parts of the pool cleaner are damaged, they must be replaced to avoid hazards.
- This device may be used by children from the age of 8 years and by persons with reduced physical, sensory or mental abilities, lack of experience and knowledge,
provided they have received supervision or instruction concerning the safe use of the device and understand the risks involved. Children should not play with the device. Cleaning
and maintenance operations that can be performed by the user may only be carried out by children under supervision.
- Keep small parts and packaging materials away from children. Danger of suffocation!
Intended use
The product is intended exclusively for private use and is not suitable for commercial use. The Robotclean 3 can be used for almost all commercially available pools with a horizontal,
level bottom. Only use the device as described in this operating manual. Any other use is considered improper and can lead to damage to property and personal injury. Ubbink Garden
BV accepts no liability for damage resulting from improper or incorrect use.

DO NOT ENTER THE SWIMMING POOL WHEN THE CLEANER IS IN OPERATION

DO NOT SWITCH THE CLEANER ON WHEN IT IS NOT IN THE WATER
ATTENTION: Before using your cleaner, remove all objects from the pool that could affect the performance of the cleaner.
ATTENTION: Take the cleaner out of the pool after each use. If you leave the cleaner in the pool all the time, this may result in additional service requirements.
Auf beiden Seiten des Reinigers befindet sich eine verstellbare Steuerdüse für den Antrieb im Wasser. Das angesaugte schmutzige Wasser wird zuerst gefiltert und danach über die
Steuerdüsen zum Antrieb für den Poolreiniger verwendet. Beide Düsen sind einstellbar, um bezogen auf die Form und Größe des Pools die beste Reinigungswirkung zu erreichen.
Commissioning
Control panel on the Powerbox (transformer)
No. Display Description
1
ON/OFF
2
CYCLE
3 Press the CYCLE button 1 x (1H flashes)
Press the CYCLE button 2 x (2H flashes)
1H/2H/3H
Press the CYCLE button 3 x (3H flashes)
1H, 2H and 3H flash together
Commissioning
1. Make sure that the cleaner is switched off.
2. Place the transformer at least 3.5 m away from the edge of the swimming pool
3. Switch the cleaner on and select your required work cycle.
After you have made the adjustment, you can let the cleaner sink into the pool carefully and slowly. Make sure that all air has been allowed to escape from the housing before it sinks to
the bottom. The pool cleaner activates automatically as soon as it is fully immersed in the water.
Manual RobotClean 3 2020.indd 2 Manual RobotClean 3 2020.indd 2
Function
On/Off switch
Work cycle selection
Press this button to switch the cleaner on
The cleaner is switched off by pressing this button again
When the cleaner is on, press this button to select the preferred working time.
Working time of 1 hour
Working time of 2 hours
Working time of 3 hours
The working time ends
26.10.20 12:20 26.10.20 12:20