Metra 99-7347B Instrucciones De Instalación página 5

Double DIN head unit provisions
1. Snap radio trim panel into factory radio
surround panel. (Figure A)
2. Screw radio brackets to radio with
screws included with the unit.
(Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
4. Reassemble dash in reverse order of
disassembly. (Figure C)
Kit Assembly 99-7347B
5
(Figure A)
(Figure B)
(Figure C)