Iso Din Head Unit Provision With Pocket - Metra 99-7347B Instrucciones De Instalación

ISO DIN head unit provision with pocket

1. Snap radio trim panel into factory radio
surround panel. (Figure A)
2. Screw radio brackets to pocket with the
supplied (4) #8 x 3/8 Phillips screws.
(Figure B)
3. Screw radio brackets to radio with
screws included with the unit.
(Figure B)
4. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
5. Reassemble dash in reverse order of
disassembly. (Figure C)
Kit Assembly 99-7347B
4
(Figure A)
(Figure B)
(Figure C)