Complete The Installation - Kohler K-2600 Guia De Instalacion

Apply
plumbers
putty.

4. Complete the Installation

Assemble the adjustable drain pop-up linkage.
Apply plumbers putty to the underside of the drain flange.
Insert the drain flange into the drain hole of the lavatory.
From underneath the lavatory, apply plumbers putty to the
underside of the drain area.
Slide the gasket, tapered side down, followed by the chrome
plated brass tube on to the drain flange.
Slide the other gasket, tapered side up, onto the drain flange and
push the gaskets and tube up against the underside of the
lavatory.
Slide the flat washer onto the drain flange and up against the
bottom gasket.
Secure the assembly with the locknut.
Connect and tighten the trap to the drain, and complete the water
supply connections to the faucet according to the instructions
packed with the faucet.
Run water into the lavatory and check for leaks.
Clean up with a non-abrasive cleaner.
Turn the water supplies on and check for leaks.
Kohler Co.
Drain Flange
(Purchased)
Tapered Gasket
Chrome Plated
Brass Tube
Tapered Gasket
Flat Washer
Locknut
9 1018896-2-C