Installation And Operation; Installation - Bartscher 18340D Manual Del Usuario

5. Installation and operation

5.1 Installation

Positioning

Unpack the device and remove the packing material.
CAUTION!
Never remove the nameplate and warning signs from the device.

Place the device on a flat, stable surface which can support the weight of a
microwave oven.

Do not place the device near flammable materials, avoid high temperatures,
moisture and high humidity.

Never place the device on a flammable surface.

To ensure proper functioning, the device must have sufficient ventilation. For this
reason, it is necessary to maintain the following safe distances (see figure below):
- above the device: 30 cm
- at the rear: 10 cm
- on the right: 10 cm
- leave free on the left side

Do not place any objects on the left side of the device in order to ensure sufficient
air ventilation.

Never block the ventilation holes.

The device must maintain a minimum distance of 2m from radios, television sets,
etc. in order to avoid interference with the signal reception.

Position the devices so that the plug is easily accessible and if necessary can be
easily removed from its socket.
30 cm
10 cm
open
10 cm
- 45 -