Bartscher 18340D Manual Del Usuario página 62

Upper splash guard
Press the recesses (a) with a thumb
to loosen the upper splash guard.
Pull it down.
Remove the upper splash guard
from the device.
Set the upper splash guard in the
initial position. Remember to insert
3 hooks into the holes at the rear of
the device.
Lift the upper splash guard and
press it at the rear behind the
edges. To do this, press the
recesses (a) with thumbs again.
Storing the device
o If the device is not used for a longer time, clean the device according to the above
mentioned instructions and store it in a dry, clean place protected against frost, sun
and children. Do not place any heavy objects on the device.
- 58 -
a
a