Festo DNCV-D Serie Manual De Instrucciones página 15

1 User
The diagnostic module type DNCV−...−D−... has been de
signed for diagnosing operating states on the cylinder−
valve combination type DNCV−... .
The diagnostic module must be inserted and screwed into
the integrated pneumatic valve of the DNCV−... .
Warning
Actuators may perform sudden unexpected move
ments.
Before carrying out installation and/or maintenance
work, switch off the following power supplies in the
sequence specified:
1. the compressed air supply
2. the power supply.
Caution
Diagnostic module DNCV−...−D−... contains electrostati
cally sensitive components.
Do not therefore touch any contacts.
Observe the regulations for handling electrostatically
sensitive components.
You will then prevent the electronics from being damaged.
Detailed information on operating the DNCV−... can be
found in the operating instructions supplied with the product.
Caution
Please observe the:
safety measures listed in the operating instructions,
the designated use of the relevant components and
modules.
Festo DNCV 0304a English
instructionsEnglish
15