CLiC-iT C-ZAM Instrucciones De Uso página 40

Climbing sling C-0 / Swen sling C-1
Reference :
DAS060-20
DAS060-35
DAS060-45
Life expectancy
The life expectancy of the loop depends on how and
how often it is used. Including both the storage time
and the time in use, the life expectancy is estimated
at an average of maximum 15 years. Only an annual
inspection by a trained person can determine
whether or not the product is in good condition or
should be taken out of use. This last point is even
more true in the event of extensive use (daily use,
excessive use). It may be stored for 5 years prior to
use, which extends its shelf life from its date of
manufacture.
In any case, dispose of the loop after 10 years of
use.
Sale
For the user's safety, it is vital, if the product is
resold outside the first destination country, that the
distributor provides the product use, maintenance,
scheduled check and repair instructions in the
language of the country of use.
Marking
Brand name: CLiC-iT
Model : Swen runner
: Pictogram indicating that users must read
these instructions
EC: compliance with Regulation (UE) 2016/425 on
personal protective equipment
0082: number of the intervening certifying body for
the monitoring of production (module C2)
Number of European standard, i.e., EN 566: 2017
22kN : resistance guaranteed on production
Manufacturing number: the first 4 digits represent
the serial number and the last 4 digits the year of
manufacture
Certifying body intervening for the UE test of the
type and module C2 :
APAVE SUDEUROPE SAS
13322 MARSEILLE Cedex 16 – France
The EU declaration of conformity is available on our website :
www.clic-it.eu
Description
This product is a runner for mountaineering,
climbing and safety.
C-0 20cm
C-0 35cm
C-0 45cm
CS60193
DAS060-EL55 C-1 55cm
DAS070-EL70 C-1 70cm
DAS060-EL90 C-1 90cm
DAS060-EL110 C-1 110cm
CLIMBING
SLING
Materials :
Nylon
Polyester thread
14mm SPECTRA loop
SWEN SLING
0082
EN 566 : 2017
Loop
IDENTIFICATION AND VERIFICATION SHEET
Model :
Type :
Serial number :
Year of manufacture :
Date of purchase :
Date of first use :
Frequency of use :
INSPECTIONS AND REPAIRS
INSPECTION 1
Date :
Defects/repairs :
Inspector's signature :
INSPECTION 2
Date :
Defects/repairs :
Inspector's signature :
INSPECTION 3
Date :
Defects/repairs :
Inspector's signature :
INSPECTION 4
Date :
Defects/repairs :
Inspector's signature :
INSPECTION 5
Date :
Defects/repairs :
Inspector's signature :
0082
EN 566 : 2017
Loop
IDENTIFICATION