Descargar Imprimir esta página

CLiC-iT C-ZAM Instrucciones De Uso página 46

Ocultar thumbs Ver también para C-ZAM:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Disassembly
1
Assembly
1
The screws must be changed during each disassembly /
assembly (thread locking glue on the locking pin (blue color))
The C-8+ swivel is supplied by default with its disassembly /
assembly tool. Available without tools on request.
Only screws supplied by the company CLiC-iT are authorized for
mounting the swivel. Versions A and B each use a specific screw
and are not interchangeable.
A
A
Control
Before each use, check the presence and correct positioning of the safety screws.
Missing little screw
2
2
OK
B
NO !
B
NO !
Missing large screw
NO !
3
3
OK
Large or small
screws protruding
Assembly
Only mount in a suitable place
where you can easily avoid
losing the screws from the
opening ring. Make sure the 2
screws are present before
and after each assembly /
disassembly. The two screws
prevent the opening of the
system. If one of the screws
is missing, the C8 + swivel
must not be used, in this case
contact
CLiC-iT
support. Tighten the screw
securely. The C8 + swivel is
locked only if the latch is
closed and the screws are
fully tightened. Charging the
C8 + in any other way is
dangerous and can reduce its
resistance, for example when
the screws are not fully
tightened. The C8 + swivel
must only be opened in
exceptional
circumstances
(eg when the textile strap is
worn
and
needs
replaced).
The 2 screws must
not protrude.
OK
technical
to
be

Publicidad

loading

Este manual también es adecuado para:

C-zam lC-zam v2 ropeDas111Das145Das095Das149