Uline H-1096 Guia De Inicio Rapido página 3

BASIC WEIGHING
1. Press the zero key and place the object(s) to be
weighed on the pan. (See Figure 4)
2. Wait for the "OK" symbol, then read the weight from the
display.
SAMPLE
ZERO COUNT
SIZE
CONVERTING THE WEIGHING UNITS
1. Press the units key repeatedly. (See Figure 5)
Continue pressing the key until the units you wish to
use are displayed.
NOTE: The order of units is as follows:
GRAMS - OUNCES - POUNDS - TROY OUNCES -
PENNYWEIGHTS - CARATS - "x" UNITS (user defined)
- GRAMS.
2. To return to the factory default (grams) press - units.
PAGE 3 OF 15
KEYBOARD FUNCTIONS CONTINUED
zero Assigns the pan and whatever is currently being
weighed a value of zero. While the scale is determining
a stable weight reading, the display will indicate "BUSY."
• Instructs scale to enter a decimal point during numeric
entry.
- Instructs scale to change the sign of a number.
Interpreted as a hyphen when entered as part of an
ID number.
When preceding any register that stores a value,
instructs the scale to clear the stored value from that
specific register. (e.g. Pressing the - tare keys will clear
the tare value in memory.)
When preceding the units key, instructs the scale
to convert the weighing units to the factory default
(grams).
Figure 4
PRINT
CLEAR RESET
OPERATION
set up
display
cal
tare
units accum
low remote
bat
int 7
gross
a.p.w. 4
i.d. 1
bat
-
local
charge
Figure 5
8 9
5 6
2 3
0
•
0521 IH-1096