Basic Counting - Uline H-1096 Guia De Inicio Rapido

WEIGHING WITH A CONTAINER
1. Press the zero key. Place the empty container on the
pan.
2. Press the tare or zero key. (If the tare weight is known, a

BASIC COUNTING

NOTE: The scale will never request a sample size less than the preset minimum sample size. The scale may
request that more pieces be added after the initial sampling if a minimum accuracy requirement has
been preset.
1. Place an empty container on the scale. Press the zero key
...............................................................................................................................
2. Press the sample size key. Each time the key is pressed the requested sample size will increase.
(i.e., Add 10, 25, 50, 100 PCs).
...............................................................................................................................
3. Place the requested number of pieces in the container. Press the count key.
...............................................................................................................................
4. Fill the container to the desired number of pieces.
...............................................................................................................................
5. Remove the pieces from the container and press the clear key to return the scale to the weight display.
...............................................................................................................................
PAGE 4 OF 15
OPERATION CONTINUED
3. Wait for the "OK" symbol. Place or pour objects or
sample
zero count print
size
sample
zero count print
size
sample
zero count print
size
sample
zero count print
size
sample
zero count print
size
full container may be placed on the pan. In this case,
enter the tare weight through the keyboard and then
press the tare key.)
liquids into the container.
0.00 g
clear
Add 10 Pc
clear
10 Pc
clear
202 Pc
clear
0.00 g
clear
Figure 6
0521 IH-1096