Manuales relacionados para Serta Commercial 600 Serie
Resumen de contenidos para Serta Commercial 600 Serie
- Página 1 Serta Commercial Series-600 Task Chair Silla de trabajo Serta serie comercial 600 Assembly Instructions Instrucciones de ensamblaje MODEL / MODELO 45421 Soporte m á ximo de la silla: 136 kg 300 lbs 300 lbs...
-
Página 2: Instrucciones De Ensamblaje
Chair Assembly Instructions Carefully unpack all parts and identify them against the parts list before attempting to assemble. To avoid scratching the components, assemble the chair on a protected surface. Note: The casters sold with this chair are intended for use on carpet and not recommended for use on tile or hard wood floors. - Página 3 PARTS/PARTES PARTS/PARTES Casters Star Base Gas Lift Seat Plate Ruedas Elevador neumático Base en forma de estrella Mecanismo del asiento Quantity/cantidad: 5 Quantity/cantidad:1 Quantity/cantidad: 1 Quantity/cantidad: 1 Left Arm Right Arm Seat Cushion Back Cushion Brazo izquierdo Brazo derecho Cojín del asiento Cojín del respaldo Quantity/cantidad: 1 Quantity/cantidad: 1...
- Página 4 Step 1 Place the Star Base (B) upside down and insert 5 Casters (A) into the holes on the Star Base (B). Paso 1 Ponga la base en forma de estrella (B) con las patas hacia arriba y inserte las 5 ruedas (A) en los hoyos situados en la base (B).
- Página 5 Step 3 Attach the Arms (E1 & E2) to the bottom of the Seat Cushion (F) by using 1-1/4” Small Screws (H) in the arm holes. *Note : Align the arms so the FRONT on the arms matches the FRONT label on the bottom of the seat cushion.
- Página 6 Step 4 Attach Seat Plate (D) to the bottom of the Seat Cushion (F) (with the front of the seat plate facing the front of seat cushion). Attach by using 1-1/2” Big Screws (J) for the front holes of the Seat Plate (D) and 1”...
- Página 7 Step 5 Align Back Cushion (G) with Seat Cushion (F) by inserting back support plate into the rear hole of the Seat Plate (D) as shown and tighten by using 5/8” Big Screws (I). *Note : Tighten the screws completely. Paso 5 Alinee el cojín del respaldo (G) con el cojín del asiento (F) insertando la plancha de soporte del...
- Página 8 Step 6 Position the assembled chair upright with the seat plate facing down. Insert the Gas Lift (C) into the center hole of the Seat Plate (D). Paso 6 Coloque la silla ensamblada verticalmente, con la plancha del asiento hacia abajo. Inserte el elevador neumático (C) en el hoyo central de la mecanismo del asiento (D).
-
Página 9: Function Instruction
Operating Instructions Instrucciones de Uso Function Instruction - 1 To Operate The Tilt : While seated, lean backward and reach under the right side of the chair to find handle 1. When the handle is placed in the level position, leaning back to allow the chair to tilt backwards. - Página 10 Function Instruction - 2 To Adjust Seat Height : While seated, reach under the right side of the chair to find the handle 2. Lift the handle and raise your body up slightly to allow the chair to rise to the desired height.
- Página 11 Function Instruction - 3 To Adjust Back Cushion Angle : While seated, lean backward and reach under the right side of the chair to find the handle 3. When the handle is placed in the level position, tilting your body backwards to adjust the angle of back cushion, push down the handle to lock the back angle while the desired angle is reached.
- Página 12 Function Instruction - 4 To Adjust Front Seat Height : While seated, reach to the right side of the seat cushion to find the knob 4. Turn the knob counter-clockwise to increase the front seat support. To reduce the front seat support, turn the knob clockwise.
- Página 13 Function Instruction - 5 To Operate Slide Seat Feature : While seated, reach under the left side of the chair to find the handle 5. Pull the handle to the up position to allow you to slide forward and backward. Push down the handle to lock the chair while desired position is reached.
- Página 14 Function Instruction - 6 To Adjust Tension On The Tilt : Reach under the front center of the chair, grasp the round knob (R) and turn it counter- clockwise to stiffen the tilt mechanism for a heavier user. Turn the knob (R) clockwise to loosen the tilt mechanism for a lighter user.
- Página 15 Function Instruction - 7 To Adjust Arm Height: Press the button and hold to allow the arms to move up and down freely and then release the button once the desired height is reached. Instrucciones de Funcionamiento - 7 Para ajustar la altura de los brazos: Presione el botón y manténgalo presionado para permitir que se muevan los brazos libremente y después libere el botón una vez cuando alcance la altura deseada.
- Página 16 Function Instruction - 8 To Adjust Armrests forward and backward: While seated, grasp the armrests and push them forward or backward to a desired position. Instrucciones de Funcionamiento - 8 Para ajustar los apoyabrazos hacia delante y hacia atrás: Mientras está sentado, sujete los apoyabrazos y empuje hacia delante o hacia atrás a la posición deseada.
- Página 17 Function Instruction - 9 To Adjust Armrests angle : While seated, grasp front end of armrests and pivot them to the left or right. Adjusting arm angle can help support different types of work and shifts in posture. Instrucciones de Funcionamiento - 9 Para ajustar el ángulo de los apoyabrazos: Mientras está...
- Página 18 Limited Warranty True Innovations seating products are warranted against defects in material and workmanship while owned by the “Original Purchaser”. The term “Original Purchaser” is defined as that party or entity which purchases True Innovations furniture from an authorized True Innovations retailer as shown by the original sales receipt.
- Página 19 Garantía Limitada Los productos de True Innovations seating están garantizados contra defectos de material y mano de obra mientras está en posesión de su “Comprador Original”. El término “Comprador Original” se define como el individuo o entidad que compra el mueble de True Innovations de un distribuidor autorizado así...