Multi-Cd Player; Playing A Cd - Pioneer KEH-P4020 Operación Manual

Multi-CD Player

Playing a CD

1
You can use this unit to control a multi-CD player,
which is sold separately.
1
TRACK NUMBER
Shows the track currently playing.
2 indicator
PLAY TIME
Shows the elapsed playing time of the cur-
rent track.
3
DISC NUMBER
Shows the disc currently playing.
13 En
2
indicator
indicator
1 Press
player.
2 Use
When you press
raised and when pressed down/–, the volume is
lowered.
3
3 Select a disc you want to listen to with the
to buttons.
1 6
For discs located at 1 to 6, press the correspond-
ing number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as
appears in the display.
• You can also sequentially select a disc by
pressing 5/∞.
4 To perform fast forward or reverse, press
and hold 2 or 3 .
5 To skip back or forward to another track,
press 2 or 3 .
Pressing 3 skips to the start of the next track.
Pressing 2 once skips to the start of the current
track. Pressing again will skip to the previous
track.
Notes
• When the multi-CD player performs the
preparatory operations,
• If the multi-CD player does not operate prop-
erly, an error message such as
be displayed. Refer to the multi-CD player
owner's manual.
• If there are no discs in the multi-CD player
magazine,
to select the multi-CD
SOURCE
to adjust the sound level.
VOLUME
up/+, the volume is
VOLUME
for disc 7, until the disc number
1
READY
is displayed.
NO DISC
is displayed.
may
ERROR-14