Kohler K-2607 Guía De Instalación Y Cuidado página 2

Tools
Important Information
CAUTION: Risk of property damage. Use care when
moving the cabinet to avoid impacting, sliding, or
side-loading the legs.
NOTE: The K-2607 bridge cabinet is designed to be installed with
the K-2604 vanity and is not intended to be installed individually.
Read both product installation instructions before beginning. The
vanity should be installed before the bridge cabinet.
Observe all local building codes.
To properly secure the cabinet, 2x6 backing material must be
installed behind the finished wall. Refer to the K-2604 vanity
installation instructions for site preparation.
1207227-2-A
Plus:
• Wood Screws
• 2x6s
• 5/16" Lag Bolts and Washers
[Min 250 lb (113.4 kg) Load Bearing]
• Socket Wrenches
• Siliconized Acrylic Caulk
2 Kohler Co.