Window Requirements; Prepare The Air Conditioner - GE ATM06 Manual Del Propietario Y Instrucciones De Instalación

Installation Instructions

1. WINDOW REQUIREMENTS

• These instructions are for a standard
double-hung window. You will need to modify
them for other types of windows.
• The air conditioner can be installed without the
side curtain panels if needed to fit in a narrow
window. See the window opening dimensions.
• All supporting parts must be secured to firm
wood, masonry or metal.
• The electrical outlet must be within reach of the
power cord.
• Follow the dimensions in the table and
illustration for your model.
(With side curtain panels)
2. STORM WINDOW
REQUIREMENTS
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will
keep it from draining properly. To adjust for this,
attach a piece of wood to the sill.
WOOD PIECES
WIDTH: 2
LENGTH: Long enough to fit inside the window
frame.
THICKNESS: To determine the thickness,
higher than the top of the storm window frame
or the vinyl frame.
Attach securely with nails or screws provided
by the installer.
than storm
window
frame
Storm window
frame
49-5000421 Rev. 0
14 1/2"
24"- 36"
than vinyl frame
(on some windows)
Wood
Sill
Vinyl frame
3. PREPARE THE AIR
CONDITIONER
A. Install the top mounting rail with 3/8" screws;
from the outside of the case.
Top mounting rail
Bottom mounting rail
B. Apply the weather seals provided to the bottom,
of the window to the seal bottom of the air
conditioner.
C. Slide the side curtain panels into the side panel
rails.
D. Slide left and right side curtain frames into top
and bottom rails. Make
sure that side curtains snap into side of the
frames.
Cut and apply
weather strip to
back edge of
the window sill.
CLICK
11