Whittier Wood Products Prairie Instrucciones Para Armar página 5

GLUE ALL
DOWELS &
TENONS
FIG. 6
6) Glue the Back Assembly (AA) to the side aprons and side stretchers. Tap firmly into place.
O
x 16
Q
7) Before attaching corner blocks, verify that the side aprons are seated snugly against the front and
back legs. Spread a light layer of glue on the angled ends of the Back Corner Block (Q). Place the
Back Corner Block (Q) on the inside corner between the back apron and Side Apron (CC). Center
the block between the top and bottom of the aprons, making sure that the block does not protrude
above the top (seat) surface of the aprons. Fasten in place with four #8 x 1" Pan Head Screws (O)
through the pre-drilled holes. Repeat with the other back corner block. See FIGURE 7A.
Spread a light layer of glue on the angled ends of the Front Corner Block (P). Place the Front
Corner Block (P) on the inside corner between the Front Apron (DD) and Side Apron (CC). Center
the block between the top and bottom of the aprons, making sure that the block does not protrude
above the top (seat) surface of the aprons. Fasten in place with four #8 x 1" Pan Head Screws (O).
Repeat for the other front corner block. See FIGURE 7B.
Corner Block
O
O
Q
FIG. 7A
AA
P
O
O
FIG. 7B
P
23W/29W — PAGE 5