Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
immediately for the cause. Vibration is
generally a warning of trouble.
c) Stop the motor and unplug whenever you
leave the equipment, before cleaning the
Blower, and before making any repairs or
inspections.
d) Shut the motor off and wait until the fan
comes to a complete stop before removing
the bag or before unclogging the chute.
e) Do not wash with a hose, avoid getting
water in motor and electrical connections.
4) Maintenance
a) Keep all nuts, bolts, and screws tight to
be sure the equipment is in safe working
condition.
b) check bag frequently for deterioration and
wear, and replace worn bags. check that
replacement bags comply with the original
manufacturer's recommendations or
specifications.
ADDITIoNAL sAfETy
INsTruCTIoNs for your
TooL
1. Do not place outlet tubes near eyes or ears
when operating.
2. Do not cross gravel paths or place the tool
on gravel while the tool is switched on.
3. Do not place any objects into the openings
and moving parts.
4. Before removing the blow tube, always
switch off the tool, unplug and allow the
tool to run down.
5. Avoid dangerous environment. Do not use
appliances in damp or wet location.
6. Do not use in rain.
7. Keep children away. All visitors should be
kept at a distance from work area.
8. Dress properly. Do not wear loose clothing
or jewelry. They can be caught in moving
parts. Use of protective gloves and
substantial footwear is recommended
when working outdoors. Wear protective
hair covering to contain long hair.
9. Use right appliance. Do not use appliance
for any job except that for which it is
intended.
All-in-one Blower/Vac/Mulcher
10. Do not overreach. Keep proper footing and
balance at all times.
11. Stay alert. Watch what you are doing. Use
common sense. Do not operate appliance
when you are tired.
12. Store idle appliances indoors. When not in
use, appliances should be stored indoors
in dry, and high or locked-up place, out of
reach of children.
13. check damaged parts. Before further use
of the appliance, a guard or other part that
is damaged should be carefully checked
to determine that it will operate properly
and perform its intended function. check
for alignment of moving parts, binding or
moving parts, breakage of parts, mounting,
and any other condition that may affect
its operation. A guard or other part that is
damaged should be properly repaired or
replaced by an authorized service center
unless indicated elsewhere in this manual.
SAVE THESE INSTRuCTIONS
1. Refer to then frequently and use then to
instruct others who may use this tool. If
someone borrows this tool, make sure they
have these instructions.
2. Use only identical replacement parts.
9
9
EN
Publicidad
Tabla de contenido
