5
Modifying TD 390 Defaults
5.1
Defaults
Operating mode
In the "Defaults" operating mode, you can modify the following defaults
in the TD 390:
The language of the TD 390 user interface (see Section 5.2) which is
multilingual. You can choose between German, English, French,
Italian and Spanish.
The default parameters of the TD 390 (see Section 5.3).
The modified default is stored in a non–volatile memory. The system
automatically returns to the "Display Messages" operating mode 30 secs.
after the last operation or after selecting the "Exit" menu function.
Note
You can only set a default when the TD 390 is connected to the PLC.
The PLC must be switched on.
TD 390
C79000–K8576–C292–01
5-1