Klein Tools MM320 Manual De Instrucciones página 7

AC VOLTAGE (LESS THAN 600V)
1. Insert RED test lead into V jack
COM jack
highest V AC (
2. Measure voltage and rotate the function selector switch
to successively lower V AC (
resolution measurements.
NOTE: Do not attempt to measure more than 600V or 200mA.
Black lead
DC VOLTAGE (LESS THAN 600V)
1. Insert RED test lead into V jack
COM jack
highest V DC (
2. Measure voltage and rotate the function selector switch to
successively lower V DC (
resolution measurements.
NOTE: When in a voltage setting and the test leads are open,
readings of order mV may appear on the display. This is noise and
is normal. By touching the test leads together to close the circuit
the meter will measure zero volts.
NOTE: Do not attempt to measure more than 600V or 200mA.
Black lead
OPERATING INSTRUCTIONS
, and rotate function selector switch
4
) setting (600V).
Red lead
, and rotate function selector switch
4
) setting (600V).
Red lead
, and BLACK test lead into
5
) settings to obtain higher
, and BLACK test lead into
5
) settings to obtain higher
to the
2
to the
2
7