Kohler STERLING SP5300 Serie Manual Del Usuario página 11

Inside Panel
Top Frame
Flange
Roller
Steel
Side
Bottom
Frame
Hole
10. Install the Rollers - Inside Panel
NOTE: The steel side of the roller must be installed against the top flange frame.
Slide #8 lock washers onto two M4 x 0.7 machine screws.
Position the two rollers on the top frame flange, on the same side as the bottom frame holes.
Secure the rollers to the top frame flanges with the M4 x 0.7 machine screws and washers threaded
through the centerhole of the flange.
11. Install the Rollers - Outside Panel
NOTE: The steel side of the roller must be installed against the top frame flange.
Slide #8 lock washers onto two M4 x 0.7 machine screws.
Place rollers on the top frame flange, on the same side as the bottom frame leg.
Secure the rollers to the top frame flanges with the M4 x 0.7 machine screws and washers threaded
through the center hole of the flange.
Sterling
#8 Lock
Washer
M4 x 0.7
Machine
Roller
Screw
Top Frame
Flange
Roller
Steel
Side
Bottom
Frame
Leg
11
Outside Panel
#8 Lock Washer
M4 x 0.7
Machine
Roller
Screw
1034037-2-B