Kohler STERLING SP5300 Serie Manual Del Usuario página 14

1/4 x 20 Screw
Washer
Towel Bar
Insert a small hex wrench into hole in screw head
and turn clockwise to secure towel bar.
15. Install the Towel Bar
Place a clear washer then a clear sleeve onto each 1/4 x 20 screw.
From the inside side of the outside panel, insert a screw into each mounting hole in the panel.
Slide a washer over the screw on the outside of the panel.
Position the towel bar over the screw and finger tighten the screw.
Insert the second screw into the door panel, slide a washer over the screw, align the second end of
the towel bar, and finger tighten the screw.
Insert the provided small hex wrench into the side hole in each screw head. Turn each screw
clockwise to tighten. Do not overtighten or the glass may be damaged.
Repeat the procedures for the inside panel towel bar.
16. Install the Screw Covers
Install screw covers over the six wall jamb screws.
Install screw covers over the four bottom frame screws.
Install screw covers over the two inside panel guide screws.
1034037-2-B
Washer
Sleeve
14
Screw
Cover
Sterling