The Rear Panel - RS Pro RSDS1000CFL Serie Inicio Rápido

The Rear Panel

1. Handle
Pull up the handle vertically for easy carrying; press it down if
you do not need the handle.
2. AC Power Input Terminal
The power available of the oscilloscope is 100~240V, 45~440Hz.
Please use the power cord provided as accessories to connect
the instrument to AC power.
3. USB Host Interface
Use U disk to save the setup file, waveforms file, csv file and
BMP file.
4. USB Device Interface
PictBridge printer or PC can be connected via this interface to
print the current interface of the oscilloscope or control the
instrument through PC software.
5. LAN Port
PC can be connected via this interface to control the instrument
through PC software.
1
7 6 5 4 3 2
15