Important To Remember - Bayer Glucometer Elite XL Guia Del Usuario

7
I4

Important to Remember

DON'T FORGET – when using the Meter:
• Insert the Check Strip, Code Strip or Test Strip
with a firm motion until it comes to a full stop.
• The tab on the strip can no longer be seen
if the Test Strip has been inserted fully into
the Meter.
• The Meter turns off automatically after
3 minutes if strip is left in the Meter.
• The Code Number (F#) appearing in the
Display must match the number appearing
on the:
----- Code Strip
----- Code Strip packet
----- Back of Test Strip packet
• To mark your Control Test at the beginning or
end of the test (before removing Test Strip from
the Meter). The "marking" prevents the Control
Test result from being averaged with the blood
glucose test results.
• You can recall all stored test results, which
includes Control Tests and deleted tests.
Glucometer Elite
®
XL