Tips On How To Use Your Breville Blender - Breville CBL30XL Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TIPS ON HOW TO BEST USE YOUR BREVILLE BLENDER
DO
Speed 1 is best for dressings, marinades
and foods that require mixing until
just combined.
Speed 2 is best for pureeing or
making cocktails.
Use PULSE for foods that only require
short bursts of power such as processing
herbs, nuts and small vegetables. The
PULSE setting is recommended for
crushing ice.
Ensure all parts have been thoroughly
washed and dried before assembly.
Ensure the blender is correctly assembled
before operating (see page 7).
Ensure the base of the pitcher is
thoroughly dry before placing onto
blender base.
Ensure the blender is placed on a clean,
dry surface to operate.
Liquids should be placed into blender
before solid ingredients, except where
specified in recipes.
All foods should be cut into cubes
approximately 1"-1
1
/
" (2-3cm) square to
2
achieve an even result.
When necessary use a plastic or rubber
spatula to wipe food down the sides of the
pitcher only when blender is in the OFF
position and has been unplugged. Ensure
the blades have stopped rotating. Do not
use metal utensils as they may damage
the blades or pitcher.
Do hold the lid down when starting to blend.
8
DON'T
Do not blend dry, thick or heavy mixture
for more than 60 seconds without turning
off the blender and then stirring the
ingredients, before recommencing blending.
Do not place any objects, other than food
into the pitcher while the motor is running.
Do not use the pitcher to store food.
As air does not circulate when blending,
this appliance will not beat egg whites,
knead dough or mash potatoes.
Do not remove the pitcher while the
blender is in operation. Always unplug the
appliance before removing the pitcher.
Overloading the blender with more than
the specified quantity as stated in these
instructions could cause the motor to
stall. Turn the blender OFF, unplug the
appliance and remove a portion of the
mixture before continuing.
MOTOR PROTECTION BUTTON (RESET BUTTON)
The safety reset button has been added to
the blender to preserve the motor life.
The switch will be activated when the
motor becomes too hot, or the load too
heavy. The unit will cease to operate. The
switch located under the motor base will
need to be reset by depressing the red
button; this can only take place after 10
minutes. The motor will need to rest for 10
minutes before blending can resume.
Reset Button
9

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido