Kathrein DVB-S-UKW Manual De Instrucciones página 9

1.3 Selecting the input symbol rate
Inp. 1 A
27.500 MS/s
Inp. 2 A
27.500 MS/s
Select the "Symbol rate" parameter and set it to the required value. The symbol rate can be changed using the up/down buttons or also
by numeric input.
2. Setting the FM channels
2.1 Selection of the desired FM output channel
Inp. 1 A
27.500 MS/s
Inp. 2 A
27.500 MS/s
Pressing the channel unit change button "<<" or ">>" switches between the inputs menu and the FM channels menu.
Octal 1
Ra -Acquisition-
Outp. 87.50
RDS edit
The cursor buttons are used to select the parameter "Output channel number" (octal 1-8). The up/down keys are used to select one of
the eight FM channels, e.g. "1".
2.2 Selection of the input signals for the selected FM channel
Octal 1
Ra -Read SI data-
Outp. 87.50
RDS edit
The input parameter "E1/2" is used to select the transponder received by the receiver unit 1 or 2. This transponder contains the desired
radio signal.
Octal 1
Ra SWR 4 BW
Outp. 87.50
RDS edit
The parameter "Ra" or "TV" can be used to set whether the display lists the radio or TV channels for selection.
1666 MHz
3/4
1354 MHz
3/4
1666 MHz
3/4
1354 MHz
3/4
E1
MHz
Vol 0dB
E1
MHz
Vol 0dB
E1
ger
MHz
Vol 0dB
3 / 6