Activities; Add An Activity - Philips SRU8008 Instrucciones De Manejo

SRU8008_IFU_bundel 1 v09.qxd
D Note
Keys of the deleted device that are used elsewhere, e.g. in an activity
or the volume keys you copied, will be deleted as well.
Check the activities you installed and reinstall them if necessary.
See 'Add an Activity' on page 13.
Check the volume keys for your devices and reinstall them if
necessary. See 'Copy the Volume' on page 12.
4.2

Activities

4.2.1

Add an Activity

You can add activities to the SRU8008. An activity consists of several key
presses that the SRU8008 sends out with just one press.
By default the SRU8008 inserts a delay of 600ms between every key
press to make sure your devices are responding correctly to the IR
signals. You can overwrite this default delay.
• If one of your devices needs a longer delay before receiving the next
IR signal, you can insert a delay of 1, 3, 5, 10 or 15 seconds.
• If an activity needs a long key press, e.g. turn up the volume, you can
select the option Hold last key.
To add an activity:
Go to Setup - Activities, select Add Activity and press
1
Select the label you want to use for the activity.
2
-or-
Select Not in list to create a new label.
Follow the instructions on the SRU8008.
3
• Select a device with the rotary wheel, press
to add it to the activity.
• Select 1, 3, 5, 10 or 15 seconds delay with the rotary wheel and
press
-or-
Select Hold last key with the rotary wheel and press
Repeat step 3 to create another activity.
4
The activity is added to the SRU8008.
You can now run the activity with the SRU8008:
Press
press .
4.2.2 Rename an Activity
To rename an activity:
Go to Setup - Activities, select Rename Activity and press
1
Enter the text for the new label with the alphanumeric keys.
2
Getting the Most out of Your SRU8008
03-12-2007
.
, select the activity with the rotary wheel and
11:35 Pagina 13
.
and press a key
.
.
13