Getting Started; Prepare - Philips SRU8008 Instrucciones De Manejo

SRU8008_IFU_bundel 1 v09.qxd
2

Getting Started

2.1

Prepare

To insert the batteries in the SRU8008:
Press the latch down and lift the cover up.
1
Place the three LR6 AA type alkaline batteries into the battery
2
compartment, as shown.
Position the cover and press firmly until you hear a click.
3
The SRU8008 displays the Philips logo for
3 seconds and continues with the Installation
Wizard to guide you through the installation.
When the batteries are almost empty, the Battery Low icon
This indicates a critical battery level. You can still operate the SRU8008
control for a short period.
Replace the batteries with new LR6 AA type alkaline batteries and
follow the local regulations for disposal of the empty batteries.
D Note
If the Battery Low icon blinks, you are not able to enter the
Setup menu anymore.
Getting Started
03-12-2007
2
1
11:35 Pagina 5
1
3
2
Installation wizard –
Language selection
blinks.
3
5