Setup Options - Rockford Fosgate RFX Serie Instalación Y Operación

Ocultar thumbs Ver también para RFX Serie:
Tabla de contenido

Publicidad

The list below shows the default Setup Options. The bracketed items are the alter-
nate options contained within each Setup Option. To select these alternates, see
Selecting Tuner Options on page 30.
• DX [LOCAL] — Adjusts the sensitivity of the tuner for rural conditions where there are
weak radio stations while Local adjusts the sensitivity for city conditions where there are
several strong radio stations.
• AMERICAS [EUR/AUST] — Allows tuning of frequencies available in different
parts of the world.
• P. PLAY [EJ MUTE] — Plays the Tuner after you eject a CD while Eject Mute
mutes the Tuner after you eject a CD.
• VIDEO OFF [VIDEO 1, VIDEO 2] — Disables the Video RCA Inputs. VIDEO 1
and 2 allow you to plug in two external video sources (TV, Nintendo, etc.) and
run their outputs through your auto A/V system.
• V/BAR ON [V/BAR OFF] — Displays the Volume Bar at the bottom of the Front
Panel while Volume Bar Off turns it off.
• INI VOL 15 — Sets the maximum Initial Volume when the unit turns on. Initial
Volume sets point of maximum volume when the unit is turned on. If the volume
setting was lower than the initial volume setting when the unit is turned off, then
the lower volume will be used at turn on. If the volume setting was higher than the
initial volume setting, then the initial volume setting is used at turn on. This feature
prevents accidental high volume turn on as well as allows high volume settings to
be retained in case another preamplifier is the system's main volume control.
• CONTRAST [VIEW 6] — Controls the view angle of the display.
• FLAT [80HZ] — Means third pair of RCA pre-outs is full-range while 80Hz
means that the pre-outs are crossed-over for subwoofer use.
• PANEL AUTO [PANEL MANU] — Automatically opens and closes Panel when
loading or ejecting discs while PANEL MANU allows the front panel to remain
open and CDs to be manually loaded or ejected.
• AUX1 IN 0 [+6, –6] — Allows you to boost the input volume of a weak exter-
nal audio source or diminish a powerful one. Useful for external sources: MP3
players, video games, VCPs, etc.
• AUX2 IN 0 [+6, –6] — Same as AUX1 IN above.
Selecting Setup Options
1. Press and hold the VOLUME knob for about 1 second until DX appears (this is
the first Tuner Option).
2. Press the VOLUME knob repeatedly to cycle through the Tuner Options listed above.
3. To change a specific Tuner Option, press the Up or Down Button to select an
alternate Tuner Option.
4. Once you have selected the Tuner Options of your choice, wait five (5) seconds
and the Tuner Options will automatically save and return you to the last Mode
Panel you selected.
S
O
ETUP
PTIONS
– 18 –

Publicidad

Tabla de contenido
loading

Tabla de contenido