Auxiliary Audio Operation; Aux Mode - Rockford Fosgate RFX Serie Instalación Y Operación

A O
UXILIARY

AUX Mode

1. Press the MODE button until AUX1 or AUX2 is
displayed.
2. The AUX inputs will immediately "see" the auxil-
iary audio input being fed into the AUX RCA jacks.
LCD Display
1. AUX1 and AUX2 will be displayed for 5 seconds
if Titling is used and selected as the default display.
2. After 5 seconds the LCD will revert to the default
display. If no title for AUX is used, AUX will be displayed continuously.
AUX Mode Titling
See Disc Titling on page 24.
NOTE: The input signal connected to the AUX RCA jacks is fed into the source unit prior to the volume
control. If the AUX input source has a constant (non-adjustable) output level, the volume control
on the faceplate can properly adjust the amplitude. To more closely match the volume of the
AUX signal to CD or radio volume, use the AUX IN sensitivity adjustment (see page 18).
The chart below shows the default settings upon startup. These are also the settings
that the unit is reset to when you push the RESET button (see Reset Button on page 15).
Preset memory
Button Illumination color
Default Display
CDX Loading
Volume Level
Balance/Fader
Station + Disc Titling
PERATION
AUX M
*Features available only on RFX9200/9300/9400
P
OWER
Mode
AS/PS
Scan
Repeat
Random
Loudness
CDP Loading
Sum
Bass/Treble
Local/DX
*
ODE
U D
P EFAULTS
Default
Original memory band
Red
Track/Time
STBY
Disc Start
Clear Memory
– 34 –
Off
Off
Off
Off
On
15
15
0
0
DX