Power Switch - Sony BC-L160 Manual De Operación

e POWER indicator
Once you press the ? side of the POWER
switch, power is supplied, and the indicator
lights up.
f DC OUT connector (XLR 4-pin,
male)
Supplies DC power to an external device,
using a DC power cord (not supplied).
g Battery pack attachment sections
1 - 4
Attach lithium-ion battery packs.
When you detach a battery pack, pull it up,
holding the release button in.
The function of battery pack attachment
section 1 (charging a battery pack,
supplying DC power, or checking a battery
pack) is selected with the CH 1 mode
selector.
h Release buttons
Press to release the attached battery packs.
i Charge mode selector (H/L)
H: Batteries are charged to their full
capacity.
L: Batteries are not charged to their full
capacity, which prolongs battery life.
j Charge mode selector (F/S)
F: for charging battery packs quickly with
the maximum current
S: for charging battery packs slowly with
low fan rotation in silent mode
k SKIP ON switch
Charging of battery packs which are
charged about 90% or more is skipped.
l POWER switch
Turns the power on or off. Once you press
the ? side of this switch, power is supplied,
and the POWER indicator lights up. When
the power is turned on, charging battery
packs, supplying of DC power to an
external device, or checking a battery pack
is enabled.
m AC IN (AC power input) connector
Used to connect the charger to an AC outlet,
using the AC power cord.
n Plug holder receptacle
The supplied plug holder secures the cord
so that it will not come loose from the
charger.
To remove
Location and Function of Parts
Plug holder
(supplied)
27