Publicidad
Idiomas disponibles
Idiomas disponibles
®
34" Table, Cabinet Top Support Plate and
Monitor to Lift Column Installation
NOTE: Using the up/down switch, extend the lift column
to full height to ease installation of monitor.
IMPORTANT:
Make sure that the cable is routed
through the two (2) cableclips that were installed onto the
inside of the hanger side panel.
IMPORTANT:
Make sure the articulating wire
manager is installed and used to contain moving wires to
prevent wire pulling or pinching.
ARTICULATING
WIRE MANAGER
x1
.750"
(19.1 mm)
3a
mechanism to open lift automatically.
MONITOR
HANGER
2
CABLE
CLIPS
NOTE: Assembly shown on this page is for
34" table monitors. To install monitor for 43"
tables, see page 16.
3b
x1
0.472"
(12.0 mm)
IMPORTANT:
Plastic cover must be installed for lift
1
M6
M6
x2
0.630"
(16.0 mm)
15 of 66
P/N 1094808001
Doc # 94775 Rev D
Publicidad
