Suntec Wellness DryFix 20 Lumio Instrucciones De Uso página 15

Is the tank-full indicator activated?
No function.
Front louvres do not open.
Dehumidifier does not extract water.
Airflow seems weak.
Unit is noisy during operation.
E3 oder E4
E1 oder E2
E5 oder E6
Defrost light on and unit stops
regularly.
Technical Data
TECHN. DATA
Dehumidifying capacity (Liter/day, at 30 °C / 80% RH)
Rated Power
Rated voltage
Dimensions
Weight
Refrigerant
Tank full or the tank has
not been properly
inserted.
Is the plug properly
inserted in the socket?
Louvre motor is
blocked
Is the unit set to a
humidity level lower
than the one in the
room?
Is the temperature in
the room too low for
water extraction to be
efficient?
Is the air outlet grill
blocked? Is the unit too
close to walls?
Is the filter dirty or
clogged?
Is the unit on uneven
surface?
Is filter clogged?
Humidity sensor error
Temperature sensor
error
Abnormal coil sensor
temperature
Unit is defrosting
MODEL
Empty the tank and make sure the tank is properly
inserted in the unit.
Insert the plug into the socket and press the
POWER-button.
Check if anything is blocking the louvre. Try to move
gently the louvres up and down, while the unit is off.
If failed, return the unit to your seller.
Please check the humidity level settings.
Please increase the temperature in the room or
reposition the unit.
Please ensure a distance of at least 20 cm between
the unit and the walls.
Please clean the filters regularly as per user manual.
Please place the unit on a flat horizontal surface.
Please clean the filters regularly as per user manual.
Unplug the unit, rest and plug it back in. If error
repeats, contact your seller.
Unplug the unit, rest and plug it back in. If error
repeats, contact your seller.
Unplug the unit, rest and plug it back in. If error
repeats, contact your seller.
Allow the unit to automatically defrost. The protection
will clear after the unit self-defrosts. Increase
temperature in the room if this repeats too often.
DryFix 20 Lumio
20 l
370 W
220V-240V/50Hz
380 x 580 x 195 mm
14,3 Kg
R134