HoMedics BPA-260 Manual De Instrucciones página 20

3. Open the arm cuff so that your arm may be placed
through it.
4. Remove tight fitting clothing from your upper left
arm so that the cuff can be wrapped around your
exposed arm.
5. P osition cuff edge 0.8-1.2
inches (2-3cm) above elbow.
6. Center tube over middle of arm.
7. Pull the end of the cuff so that it tightens
evenly around your arm. Press the hook
and loop material together to secure.
Allow room for 2 fingers to fit between the
cuff and your arm.
8. L ay your arm on a table (palm upward) so
the cuff is at the same height as your heart.
Make sure the tube is not kinked.
BPA-260_A 323101305 0623.indd 19
19
2010/6/23 下午 10:05